20
General information about radio operation
Technical specifications
9
General information about radio
operation
Radio transmission is performed on a non-exclusive trans-
mission path, which means that there is a possibility of in-
terference occurring. Interference can also be caused by
switching operations, electrical motors or defective electri-
cal devices.
The range of transmission within buildings can dif-
fer greatly from that available in the open air. Be-
sides the transmitting power and the reception
characteristics of the receiver, environmental fac-
tors such as humidity in the vicinity have an import-
ant role to play, as do on-site structural/screening
conditions.
Hereby, Daikin Europe N.V. declares that the radio equip-
ment type DHC EKRACPUR1PA is in compliance with the
Directive 2014/53/EU. The original declaration of confor-
mity is available from the EKRACPUR1PA product pages.
https://qr.daikin.eu/?N=EKRACPUR1PA
10
Technical specifications
Device name:
EKRACPUR1PA
Supply voltage
Plug-in mains adapter (input): 100 V-240 V/50 Hz
Power consumption
plug-in mains adapter:
2.5 W max.
Supply voltage:
5 VDC
Current consumption:
500 mA max.
Standby
power consumption:
1.1 W
Degree of protection:
IP20
Ambient temperature:
5 to 35 °C
Dimensions (W x H x D):
118 x 104 x 26 mm
Weight:
153 g
Radio frequency band:
F1:
868.0-868.6 MHz
F2:
869.4-869.65 MHz
Maxium radiated power:
10 dBm max.
Receiver category:
SRD category 2
Typ. open area RF range:
400 m
Duty cycle:
F1:
< 1 % per h
F2:
< 10 % per h
Network:
10/100 MBit/s, Auto-MDIX
Subject to technical changes.
