5 Operation
Operation manual
8
EKHWET90~120BAV3
R32 Split series – Domestic hot water tank
4P680075-1B – 2022.02
Submenu
Description
[D]
Wireless
gateway
Restriction:
Only displayed if a
wireless LAN (WLAN) is installed.
Contains settings needed when
configuring the Daikin Residential
Controller app.
5.3.3
Setpoint screen
The setpoint screen is displayed for screens describing system
components that need a setpoint value.
Example
[5] Tank temperature screen
+
–
50
°C
5
Tank
Explanation
a1
d
+
–
d
e
d
e
c
a2
b1
b2
Possible actions on this screen
Go through the list of the submenu.
Go to the submenu.
Adjust and automatically apply the desired
temperature.
Item
Description
Minimum temperature limit
a1
Fixed by the unit
a2
Restricted by the installer
Maximum temperature limit
b1
Fixed by the unit
b2
Restricted by the installer
Current temperature
c
Measured by the unit
Desired temperature
d
Turn the right dial to
increase/decrease (for
Reheat only
mode).
Submenu
e
Turn or press the left dial to
go to the submenu.
5.3.4
Detailed screen with values
Example:
a
b
c
a
b
c
7.2.1
Time/date
Hours
11
30
Minutes
a
Settings
b
Values
c
Selected setting and value
Possible actions on this screen
Go through the list of settings.
Change the value.
Go to the next setting.
Possible actions on this screen
Confirm changes and proceed.
5.4
Turning operation ON or OFF
5.4.1
Visual indication
Certain functionalities of the unit can be enabled or disabled
separately. If a functionality is disabled, the corresponding
temperature icon in the home screen will be greyed out.
Tank heating operation
55
a
55
b
a
Tank operation ON
b
Tank operation OFF
5.4.2
To turn ON or OFF
Tank heating operation
NOTICE
Disinfection mode
. Even if you turn OFF tank heating
operation ([C.3]:
Operation
>
Tank
), disinfection mode will
remain active. However, if you turn it OFF while
disinfection is running, an AH error occurs.
1
Go to [C.3]:
Operation
>
Tank
.
Operation
Tank
Off
C.3
2
Set operation to
On
or
Off
.
5.5
Reading out information
To read out information
1
Go to [8]:
Information
.
Possible read-out information
In menu…
You can read out…
[8.2]
Malfunction history
Malfunction history
[8.3]
Dealer information
Contact/helpdesk number
[8.4]
Sensors
Outdoor temperature, Tank
temperature, Refrigerant temp.
[8.5]
Actuators
Status/mode of each actuator
Booster heater
[8.6]
Operation modes
Current operation mode
Example:
Defrost/oil return
mode
[8.7]
About
Version information about the
system
