Operation manual
11
EKHVWQ0 E260AA1V3
Domestic hot water heat pump
4PW65343-1A – 10.2010
Programming quiet mode
■
Programming quiet mode is carried out as follows:
1
Press the
<
button.
The actual mode is blinking.
2
Use the
pi
and
pj
buttons to select the mode you want
to program (quiet mode
s
or domestic water heating
w
).
Select quiet mode (
s
).
The selected mode is blinking.
3
Press the
<
button to confirm the selected mode.
The first programmed action is displayed.
4
Use the
pi
and
pj
buttons to consult the other
programmed actions of that day.
This is called the readout mode. Empty program actions (e.g. 4
and 5) are not displayed.
5
Press the
<
button for 5 seconds to enter the programming
mode.
6
Use the
<
button to select the action number you would like to
program or to modify.
7
Use the
pi
and
pj
buttons to set the correct action time.
8
Use the
ba
button to select or deselect
x
as action:
9
Repeat steps 6 to 8 to program the other actions of the selected
mode.
When all actions have been programmed, make sure that the
display shows the highest action number you would like to save.
10
Press the
<
button for 5 seconds to store the programmed
actions.
If the
<
button is pressed when action number 3 is displayed,
actions 1, 2 and 3 are stored but 4 and 5 are deleted.
You automatically return to step 4.
By pressing the
pr
button several times, you return to previous
steps in this procedure and finally return to normal operation.
INFORMATION
Returning to previous steps in the programming procedure
without saving modified settings is done by pressing the
pr
button.
