Daikin EBLA04E2V3, Installer'S Reference Manual

Page: 112 / 284

9 | Electrical installation
Installer reference guide
112
EBLA04~E23V3 + EDLA04~E23V3
Daikin Altherma 3 M
4P685228-1A – 2022.05
9.2.8 To connect the domestic hot water pump
Wires: (2+GND)×0.75 mm²
DHW pump output. Maximum load: 2 A (inrush), 230 V AC, 1 A
(continuous)
[9.2.2] DHW pump
[9.2.3] DHW pump schedule
1 Access the electrical connections. See "9.2.1 To connect the electrical wiring
to the outdoor unit" [
4
95].
2 Connect the domestic hot water pump cable to the appropriate terminals as
shown in the illustration below.
X2M.2
X2M.1
M2P
M
1~
180°
2 1
X2M
3 Fix the cable with cable ties to the cable tie mountings.
9.2.9 To connect the alarm output
Wires: (2+1)×0.75 mm²
Maximum load: 0.3 A, 250 V AC
[9.D] Alarm output
1 Access the electrical connections. See "9.2.1 To connect the electrical wiring
to the outdoor unit" [
4
95].
2 Connect the alarm output cable to the appropriate terminals as shown in the
illustration below.