D-EOMOAH00903-21_01EN - 4 / 37
2
Safety Information
Observe all safety directions and comply with the corresponding general safety regulations in order to prevent personal
injury and damage to property.
•
Safety devices may not be removed, bypassed or taken out of operation.
•
Apparatus and system components may only be used in a technically fault-free state. Faults that can affect safety
must be rectified immediately.
•
Observe the required safety instructions against excessively high contact voltages.
•
The plant may not be in operation if the standard safety devices are out of operation or if their effects are
influenced in some other way.
•
All handling that affects the prescribed disconnection of the protective extra-low voltage (AC 24 V) must be
avoided.
•
Disconnect the supply voltage before opening the apparatus cabinet. Never work when the power is on!
•
Avoid electromagnetic and other interference voltages in signal and connection cables.
•
Assembly and installation of system and plant components may only be performed in accordance with
corresponding installation instructions and instructions for use.
•
Every electric part of the system must be protected against static charging: electronic components, open printed
circuit boards, freely accessible connectors and apparatus components that are connected with the internal
connection.
•
All equipment that is connected to the system must be CE marked and comply with the Machine Safety Directive.
