4 Maintenance
Service manual
48
ATXP20~3 FTXP20~7 ARXP20~3
RXP20~71L2V1B
Split Comfora R32
ESIE18-01 – 2019.02
4
Maintenance
4.1
To clean the outdoor unit heat
exchanger
1
Straighten the hair fins.
2
Clear the outdoor unit heat exchanger from dust, leaves,…
using a fin-comb or compressed air/N
2.
CAUTION
Avoid bending or damaging the hair fins of the outdoor unit
heat exchanger during the cleaning process.
Is the problem solved?
Action
Yes
No further actions required.
No
Return to the troubleshooting of
the specific error and continue
with the next procedure.
4.2
To clean the indoor unit heat
exchanger
1
Straighten the hair fins.
2
Clear the indoor unit heat exchanger from dust, leaves,… using
a fin-comb or compressed air/N
2.
CAUTION
Avoid bending or damaging the hair fins of the indoor unit
heat exchanger during the cleaning process.
Is the problem solved?
Action
Yes
No further actions required.
No
Return to the troubleshooting of
the specific error and continue
with the next procedure.
4.3
To clean the air filters
1
Push the tab at the centre of each air filter, then pull it down.
2
Pull out the air filters.
1
2
Note: (class 50~71)
The titanium apatite deodorizing filter MUST
be removed before cleaning the air filter.
3
Remove the titanium apatite deodorizing filter from all 4 claws.
a
Claw
4
Wash the air filters with water or clean them with a vacuum
cleaner.
5
Soak in lukewarm water for about 10 to 15 minutes.
INFORMATION
▪ If the dust does NOT come off easily, wash the air
filters with a neutral detergent diluted in lukewarm
water. Dry the air filters in the shade.
▪ Be sure to remove the titanium apatite deodorizing
filter.
▪ It is recommended to clean the air filters every 2
weeks.
Is the problem solved?
Action
Yes
No further actions required.
No
Return to the troubleshooting of
the specific error and continue
with the next procedure.
