Daikin BRC7E61W Opration Manual Download Page 7

English

3

20

OPERATING INDICATOR LAMP (Red)

This lamp stays lit while the air 
conditioner runs. It flashes when the 
unit is in trouble.

21

TIMER INDICATOR LAMP (Green)

This lamp stays lit while the timer is set.

22

AIR FILTER CLEANING TIME 
INDICATOR LAMP (Red)

Lights up when it is time to clean the air 
filter.

23

DEFROST LAMP (Orange)

Lights up when the defrosting opera-
tion has started. (For cooling  only type 
this lamp does not turn on.)

24

FAN/AIR CONDITIONING SELECTOR 
SWITCH

Set the switch to “

” (FAN) for FAN 

and “

” (A/C) for HEAT or COOL.

25

COOL/HEAT CHANGEOVER SWITCH

Set the switch to “

” (COOL) for 

COOL and “

” (HEAT) for HEAT.

NOTES

For the sake of explanation, all indica-
tions are shown on the display in Figure 1 
contrary to actual running situations.

Fig. 1-2 shows the remote controller with 
the front cover opened.

Fig. 1-3 shows this remote controller can 
be used in conjunction with the one pro-
vided with the VRV system.

If the air filter cleaning time indicator lamp 
lights up, clean the air filter as explained 
in the operation manual provided with the 
indoor unit.
After cleaning and reinstalling the air fil-
ter, press the filter sign reset button on 
the remote controller.  The air filter clean-
ing time indicator lamp on the receiver will 
go out.

The Defrost Lamp will flash when the power 
is turned on. This is not a malfunction.

Precautions in handling remote con-
troller

Direct the transmitting part of the remote 
controller to the receiving part of the air 
conditioner.

If something blocks the transmitting and receiv-
ing path of the indoor unit and the remote con-
troller as curtains, it will not operate.

Transmitting distance is approximately 7 m.

Do not drop or get it wet.

It may be damaged.

Never press the button of the remote con-
troller with a hard, pointed object.

The remote controller may be damaged.

Installation site

It is possible that signals will not be received 
in rooms that have electronic fluorescent 
lighting. Please consult with the salesman 
before buying new fluorescent lights.

If the remote controller operated some 
other electrical apparatus, move that 
machine away or consult your dealer.

3. HANDLING FOR 

WIRELESS REMOTE 
CONTROLLER

2 short beeps 
from the receiver 
indicates that the 
transmission is 
properly done.

Summary of Contents for BRC7E61W


















Reviews: