5
2. Accessories
The following accessories are included.
Wired remote controller
Wood screw
Small screw
Installation & Operation manual
(M3.5 × 16)
(M4 × 16)
(1 pc.)
(1 pc.)
(2 pcs.)
(2 pcs.)
(1 pc.)
3. Button locations and descriptions
1. ON/OFF button
2. Operation lamp
(Green)
6. Temperature
Setting button
7. Airfl ow Direction
Adjustment button
3. Mode Selector
button
4. Display (LCD)
5. Fan Speed Control
button
1. ON/OFF button
• Press this button and the system will start.
• Press this button again and the system will
stop.
2. Operation lamp (Green)
•
This lamp lights up during operation.
• This lamp blinks if a malfunction occurs.
3. Mode Selector button
Press this button to select the operation mode
of your preference.
• Available modes vary with the connected model.
4. Display (LCD)
Shows the status and detail of operation.
5. Fan Speed Control button
Press this button to select the fan speed of
your preference.
6. Temperature Setting button
Press this button to set the temperature.
: Each press raises the
set temperature by 1°C
: Each press lowers the
set temperature by 1°C
The variable temperature range is 16°C to 32°C.
7. Airfl ow Direction Adjustment
button
Press this button to adjust the airfl ow direction
(or fl ap position).
• If swing mode is not available on the model
(Duct model for example), “
”
may be displayed for 3 seconds when this
button is pressed.
01_EN_4P543053-1C.indd 5
10-May-19 4:13:15 PM
