4 Operation
Installation and operation manual
5
BS
Madoka wired remote controller
4P596265-1 – 2019.11
Icon
Description
Schedule/Timer.
Indicates that the system operates
according to a schedule, or that the OFF timer is
enabled.
Time not set
. Indicates that controller's time is not
set.
Self-cleaning filter operation.
Indicates that self-
cleaning filter operation is active.
Quick Start.
Indicates that Quick Start mode is active
(Sky Air only).
Test operation.
Indicates that Test Operation mode
is active (Sky Air only).
Inspection
. Indicates that the indoor or outdoor unit is
being inspected.
Periodic inspection.
Indicates that the indoor or
outdoor unit is being inspected.
Backup.
Indicates that in the system an indoor unit is
set as backup indoor unit.
Individual airflow direction
. Indicates that the
individual airflow direction setting is enabled.
Information.
Indicates that the system has a
message to convey. To see the message, go to the
information screen.
Warning.
Indicates that an error occurred, or that an
indoor unit component needs to be maintained.
Power consumption limit.
Indicates that the
system's power consumption is being limited, and that
it is running with restricted capacity.
End of power consumption limit.
Indicates that the
system's power consumption is no longer being
limited, and that it is no longer running with restricted
capacity.
Rotation.
Indicates that Rotation mode is active.
Setback
. Indicates that the indoor unit is operating
under setback conditions.
Ventilation
. Indicates that a heat reclaim ventilation
unit is connected.
INFORMATION
▪ For information on the operation mode and ventilation
mode icons, see
6] and
▪ Most icons are related to things set in the Madoka
Assistant app. For more information, see the app, and
the installer and user reference guide.
3.4
Status indicator
+
-
a
a
Status indicator
INFORMATION
For a full description of the behaviour of the status
indicator, see the installer and user reference guide.
4
Operation
4.1
Basic usage
4.1.1
Home screen
Depending on configuration, the controller either has a standard or a
detailed home screen. In most cases, the standard home screen
gives you only the active operation mode, messages (if any), and the
setpoint temperature (in case of Cooling, Heating, or Auto operation
mode).The detailed home screen gives you all kinds of information
through status icons.
Standard
Detailed
a
b
c
19
a
b
c
a
Messages
b
Active operation mode
c
Setpoint temperature
INFORMATION
The controller is equipped with a power saving function
that causes the screen to go blank after a period of
inactivity. To make the screen light up again, press one of
the buttons.
4.1.2
Main menu
From the home screen, press
to enter the main menu. Use
and
to cycle through the menus. Press
again to enter one of
the menus.