14 Configuration
Installer and user reference guide
27
BK+S
Wired remote controller
4P513690-1 – 2018.03
Result:
All slave controllers display the "changeover under
centralised control" icon.
To release Cooling/Heating masterhood
Prerequisite:
You are in the installer menu.
Prerequisite:
You are operating the controller of the indoor unit that
you want to release from its masterhood.
1
Navigate to the Cooling/Heating masterhood menu.
2
Press
to release the indoor unit from its masterhood.
Result:
The indoor unit is released from its masterhood.
Result:
The controllers of all indoor units display a blinking
"changeover under centralised control" icon.
Information
About the information menu
In the information menu, you can find the following information:
Information
Description
SW1
Controller software ID
Ver
Controller software version
Time
SW2
UE878 software ID
--:--:--:--:--:--:
UE878 MAC address
To read out information
Prerequisite:
You are in the installer menu.
1
Navigate to the information menu.
2
Read out information.
3
Press
to go to the second page.
