Daikin BRC1H52K, Installation And Operation Manual, Page: 3 / 12

2 About this document
Installation and operation manual
3
BK+S
Madoka wired remote controller
4P596264-1 – 2019.11
1.2 For the installer
The precautions described in this document cover very important
topics, follow them carefully.
INFORMATION
This controller is an option and cannot be used standalone.
Also see the installation and operation manual of the
indoor and outdoor units.
WARNING
Improper installation or attachment of equipment or
accessories could result in electric shock, short-circuit,
leaks, fire or other damage to the equipment. Only use
accessories, optional equipment and spare parts made or
approved by Daikin.
WARNING
All field wiring and components MUST be installed by a
licensed electrician and MUST comply with the applicable
legislation.
NOTICE
The remote controller MUST be mounted indoors.
NOTICE
When the controller is used as room thermostat, select an
installation location where the average temperature in the
room can be detected.
Do NOT install the controller in the following places:
▪ In places where it is exposed to direct sunlight.
▪ In places where it is near a heat source.
▪ In places that are affected by outside air or air draught due to e.g.
door opening/closing.
▪ In places where the display can easily get dirty.
▪ In places where there is NO easy access to the controls.
▪ In places with temperatures <–10°C and >50°C.
▪ In places where the relative humidity is >95%.
▪ In places where there is machinery that emits electromagnetic
waves. Electromagnetic waves may disturb the control system,
and cause malfunction of the equipment.
▪ In places where it may be exposed to water, or in generally moist
areas.
If you are NOT sure how to install or operate the unit, contact your
dealer.
After finishing installation:
▪ Conduct a trial operation to check for faults.
▪ Explain the user how to operate the controller.
▪ Ask the user to store the manual for future reference.
This controller is part of a refrigerant leak detection system for
safety. To be effective, the system must be electrically powered at all
times after installation, other than when servicing.
INFORMATION
Consult your dealer regarding the relocation and
reinstallation of the controller.
2 About this document
Target audience
Authorised inst end users
Documentation set
This document is part of a documentation set. The complete set
consists of:
▪ Installation and operation manual:
▪ Installation instructions
▪ Basic operation instructions
▪ Installer and user reference guide:
▪ Extended installation and operation information
▪ Declaration of conformity
The documentation set is available from the BRC1H product pages:
▪ BRC1H52W: https://qr.daikin.eu/?N=BRC1H52W
▪ BRC1H52K: https://qr.daikin.eu/?N=BRC1H52K
▪ BRC1H52S: https://qr.daikin.eu/?N=BRC1H52S
INFORMATION: Declaration of conformity
Hereby, Daikin Europe N.V. declares that the radio
equipment type BRC1H is in compliance with the Directive
2014/53/EU. The original declaration of conformity is
available from the BRC1H product pages.
INFORMATION: Madoka Assistant in-app
documentation
The controller only allows for basic settings and operation.
Advanced settings and operation are performed via the
Madoka Assistant app. For more information, see the app
and its in-app documentation. The Madoka Assistant app
is available from Google Play and the Apple Store.
Latest revisions of the supplied documentation may be available on
the regional Daikin website or via your dealer.
The original documentation is written in English. All other languages
are translations.
Technical engineering data
▪ A subset of the latest technical data is available on the regional
Daikin website (publicly accessible).
▪ The full set of latest technical data is available on the Daikin
Business Portal (authentication required).