SiBE04-809
Outdoor Unit
Removal Procedure
167
3. Remove the fan motor.
The screw has clockwise
winding.
1
Unscrew the washer-
fitted nut (M10) of the
propeller fan with a
spanner.
2
Remove the propeller
fan.
Align
mark of the
propeller fan with D-cut
section of the motor shaft
when reassembling.
3
Cut the clamp.
Step
Procedure
Points
(R7196)
Propeller fan
D-cut
(R7197)
(R7198)
Summary of Contents for ARXG35E3V1B
Page 1: ...SiBE04 809 Applied Models Inverter Pair Heat Pump Inverter Pair Wall Mounted Type E Series...
Page 11: ...Introduction SiBE04 809 x...
Page 12: ...SiBE04 809 List of Functions 1 Part 1 List of Functions 1 List of Functions 2...
Page 14: ...SiBE04 809 Specifications 3 Part 2 Specifications 1 Specifications 4...