Daikin Altherma EHYHBH05A Series, Installer'S Reference Manual

Page: 179 / 264

10 | Configuration
Installer reference guide
179
08CA + EHY EHYHBH/X08A + EHYKOMB33AA
Daikin Altherma hybrid heat pump
4P355634-1G – 2022.09
10.1.5 Menu structure: Overview installer settings
[A]
[A.2]
[A.2.1]
[A.2.2]
[A.2.2.6]
[A.3]
[A.3.1]
[A.3.1.1]
[A.3.2]
[A.3.3]
[A.4]
[A.4.4]
[A.5]
[A.5.2]
[A.7]
[A.6]
[A.6.3]
[A.6.2]
Installer settings
Language
System layout
Space operation
Domestic hot water (DHW)
Heat sources
System operation
Commissioning
Overview settings
System layout
Standard
Options
Confirm layout
Space operation
LWT settings
Room thermostat
Operation range
Domestic hot water
Type
Disinfection
Maximum setpoint
SP mode
Weather-dependent curve
Heat sources
Boiler
System operation
Auto restart
Preferential kWh rate
Pwr consumpt. control
Averaging time
Ext amb. sensor offset
Forced defrost
Commissioning
Test run
UFH screed dryout
Air purge
Actuator test run
Standard
Unit type
Compressor type
Indoor software type
Forced off contact
Unit control method
Number of LWT zones
Pump operation mode
Power saving possible
User interface location
Options
DHW operation
DHW tank
DHW tank type
Contact type add.
Digital I/O PCB
Demand PCB
External kWh meter
DHW pump
External sensor
Leaving water
Main
Additional
Room thermostat
Room temp. range
Room temp. offset
Ext. room sensor offset
Operation range
Space heating OFF temp
Space cooling On temp
Disinfection
Disinfection
Operation day
Start time
Temperature target
Duration
Boiler
Equilibrium temp.
Prefer. kWh rate PS
Forced pump OFF
Pwr consmp ctrl
Mode
Type
Amp. value
Amp. limits for DI
kW value
kW limits for DI
Digital I/O PCB
Solar kit
Alarm output
Main
LWT setpoint mode
Temperature range
Modulated LWT
Shut-off valve
Emitter type
[A.3.1.2] Additional
LWT setpoint mode
Temperature range
Room temp. step
Contact type main
Gas meter
Calorific value
Savings mode
Emergency
LAN adapter
INFORMATION
Depending on the selected installer settings and unit type, settings will be visible/
invisible.