4 Operation
User reference guide
16
EBLQ+EDLQ011~W1 + EK(2)CB
EKMB9W1
Daikin Altherma low temperature monobloc
4P522035-1 – 2018.01
1
Go to [1]:
> Set time/date.
INFORMATION
Switch to Adv. end user to change daylight saving time and
12/24h notation.
To configure units of measurement
Prerequisite:
You switched the permission level to Advanced end
user.
1
Go to [7.6]:
> User settings > Unit of measurement.
Possible units of measurement settings
Setting
Possible units of measurement
Decimal point
▪ Dot
▪ Comma
Temperature
▪ °C
▪ °F
Produced energy
▪ kWh
▪ MBtu
Flow
▪ l/min
▪ GPM
To configure the contrast of the user interface
Prerequisite:
You switched the permission level to Advanced end
user.
1
Go to [7.1.1]:
> User settings > Display > Contrast.
To configure the backlit LCD time of the user interface
Prerequisite:
You switched the permission level to Advanced end
user.
1
Go to [7.1.2]:
> User settings > Display > Backlit LCD time.
4.6.6
Configuring user profile and home pages
To set a user profile
Prerequisite:
You switched the permission level to Advanced end
user.
1
Go to [7.1.3]:
> User settings > Display > User profile.
2
Select a user profile and press
.
Possible user profiles
If user profile = Detailed, you can see and do more on the home
pages.
User profile = Basic
User profile = Detailed
15:20
20.0°C
Mon
Room
Actual temperature
15:20
20.0°C
17:30
Actual temperature
Room
Scheduled
Mon
Tue
To configure which home pages are made available to the
end user
Prerequisite:
You switched the permission level to Advanced end
user.
1
Go to [7.1.4]:
> User settings > Display > Available home
pages.
Result:
The home pages that are possible for your system
layout are listed.
2
Select a home page and press
.
3
Do one of the following:
▪ To display the home page, select Yes and press
.
▪ To hide the home page, select No and press
.
4.7
Preset values and schedules
4.7.1
Using preset values
About preset values
You can define preset values for multiple controls. Preset values
make it easy to use the same value in many places (schedules and
room temperature home page ( and )). If you later want to change
the value, you only have to do it in one place.
To define preset values
1
Go to [7.4]:
> User settings > Preset values.
2
Select for which control you want to define a preset value.
Example:
Room temperature.
3
Select a preset value and press
.
Example:
Comfort
(heating).
4
Select a temperature and press
.
Possible preset values
Control
Preset value
Where used
Room
temperature
Comfort
▪ Room
temperature
schedules
▪ Room temperature home
page ( and ) if user
profile = Detailed
Eco
LWT main
Comfort
Main leaving water
temperature schedules
Eco
Tank
temperature
Storage comfort
DHW tank temperature
schedule if DHW tank mode
is
▪ Scheduled
▪ Sch reheat
Storage eco
Reheat
DHW tank temperature
schedule if DHW tank mode
= Sch reheat
Quiet level
Used when quiet mode is
set to On
Elec price
High
Medium
Low
Only when the Bivalent
setting is activated (installer
setting).
Fuel price
Only when the Bivalent
setting is activated (installer
setting).
4.7.2
Using and programming schedules
About schedules
Depending on your system layout and installer configuration,
schedules (predefined and/or user‑defined) for multiple controls may
be available.
You can:
▪ Select which schedules you currently want to use.
▪ Program your own schedules if the predefined schedules are not
satisfactory. The actions you can program are control specific.