Daikin Altherma EAVZ16S18DA6V, Installer'S Reference Manual

Page: 27 / 216

5 | About the units and options
Installer reference guide
27
EPGA11~16DAV3(7) + EA23DA6V(7)+9W
Daikin Altherma 3 H F
4P556075-1A – 2021.09
Model identification
Example: E AV Z 16 S 18 DA 6V
Code Description
E European model
AV Floor-standing hydro-split unit with integrated tank
Z Dual-zone model
16 Capacity class
S Integrated tank material: Stainless steel
18 Integrated tank volume
DA Model series
6V Backup heater model
5.3 Combining units and options
INFORMATION
Certain options might NOT be available in your country.
5.3.1 Possible options for the outdoor unit
Bottom plate heater (EKBPH140L7)
▪ Prevents freeze-up of the bottom plate.
▪ Recommended in areas with low ambient temperature and high humidity.
For installation instructions, see the installation manual of the bottom plate heater.
5.3.2 Possible options for the indoor unit
User interface used as room thermostat (BRC1HHDA)
▪ The user interface used as room thermostat can only be used in combination
with the user interface connected to the indoor unit.
▪ The user interface used as room thermostat needs to be installed in the room
that you want to control.
For installation instructions, see the installation and operation manual of the user
interface used as room thermostat.
Room thermostat (EKRTWA, EKRTR1)
You can connect an optional room thermostat to the indoor unit. This thermostat
can either be wired (EKRTWA) or wireless (EKRTR1).
For installation instructions, see the installation manual of the room thermostat
and addendum book for optional equipment.
Remote sensor for wireless thermostat (EKRTETS)
You can use the remote indoor temperature sensor (EKRTETS) only in combination
with the wireless thermostat (EKRTR1).
For installation instructions, see the installation manual of the room thermostat
and the addendum book for optional equipment.