Daikin Altherma 3 M EBLA04E V3 Series, User Reference Manual

Page: 52 / 68

5 | Operation
User reference guide
52
EBLA04~E23V3 + EDLA04~E23V3
Daikin Altherma 3 M
4P685231-1A – 2023.05
c Smar app The ONECTA app needs to be installed on the
user's smartphone. See:
http://www.onlinecontroller.daikineurope.com/
Configuration
To configure the ONECTA app, follow the in-app instructions. While doing this, the
following actions and information are needed on the user interface:
D
Wireless gateway
Malfunctioning
Operation
User profile
Room
[D]
Wireless gateway
[D.1] Mode
[D.2] Reboot
[D.3]
WPS
[D.4] Remove from cloud
[D.5] Home network connection
[D.6] Cloud connection
[D.1] Mode : Turn AP mode ON (= WLAN cartridge active as access point):
1 Go to [D.1]: Wireless gateway > Mode .
2 In the Enable AP mode screen, select Yes .
[D.2] Reboot : Reboot the WLAN cartridge:
1 Go to [D.2]: Wireless gateway > Reboot .
2 In the Reboot the gateway screen, select OK .
[D.3] WPS : Connect the WLAN cartridge to the router:
INFORMATION
You can only use this function if it is supported by the software version of the WLAN,
and the software version of the ONECTA app.
1 Go to [D.3]: Wireless gateway > WPS .
2 In the WPS screen, select Yes .
[D.4] Remove from cloud : Remove the WLAN cartridge from the cloud:
1 Go to [D.4]: Wireless gateway > Remove from cloud .
2 In the Remove from cloud screen, select Yes .
[D.5]
Home network connection
: Read out the status of the connection to the
home network:
1 Go to [D.5]: Wireless gateway > Home network
connection .
2 Read out the connection status:
▪ Disconnected from [WLAN_SSID]
▪ Connected to [WLAN_SSID]
[D.6] Cloud connection : Read out the status of the connection to the cloud: