2 About the box
Installation manual
4
EAV23DA6V
Daikin Altherma 3 H F
4P606486-1 – 2019.12
▪
Addendum book for optional equipment:
▪ Additional info about how to install optional equipment
▪ Format: Paper (in the box of the indoor unit) + Digital files on
http://www.daikineurope.com/support-and-manuals/product-
information/
Latest revisions of the supplied documentation may be available on
the regional Daikin website or via your dealer.
The original documentation is written in English. All other languages
are translations.
Technical engineering data
▪ A
subset
of the latest technical data is available on the regional
Daikin website (publicly accessible).
▪ The
full set
of latest technical data is available on the Daikin
Business Portal (authentication required).
Online tools
In addition to the documentation set, some online tools are available
for installers:
▪
Heating Solutions Navigator
▪ Digital toolbox that offers a variety of tools to facilitate the
installation and configuration of heating systems.
▪ To access Heating Solutions Navigator, registration to the
Stand By Me platform is required. For more information, see
https://professional.standbyme.daikin.eu
▪
Daikin e-Care
▪ Mobile app for installers and service technicians that allows you
to register, configure and troubleshoot heating systems.
▪ The mobile app can be downloaded for iOS and Android
devices using the QR codes below. Registration to the Stand
By Me platform is required to access the app.
App Store
Google Play
2
About the box
2.1
Indoor unit
INFORMATION
This unit has been tested and approved according to
BS EN12897:2016
2.1.1
To remove the accessories from the
indoor unit
1×
4×
8×
1×
1×
1×
4×
1×
1×
1×
1×
1×
a
b
c
d
e
j
k
l
f
g
h
i
a
Shut-off valves for water circuit
b
Overpressure bypass valve
c
Tundish (to mount onto the pressure relief valve discharge
pipe)
d
Brass compression coupler
e
Discharge pipe (for pressure relief valve)
f
General safety precautions
g
Addendum book for optional equipment
h
Indoor unit installation manual
i
Operation manual
j
Sealing rings for shut-off valves (space heating water
circuit)
k
Sealing rings for field-supplied shut-off valves (domestic
hot water circuit)
l
Sealing tape for low voltage wiring intake
2.1.2
To handle the indoor unit
Use the handles at the back and at the bottom to carry the unit.
b
a
a
b
a
Handles at the back of the unit
b
Handles at the bottom of the unit. Carefully tilt the unit to
the back so that the handles become visible.
2.2
Domestic hot water tank kit
2.2.1
To remove the accessories from the
domestic hot water tank kit
d
b
a
c
e
g
f
a
Pressure reducing valve/pressure relief valve combination.
Water inlet and water outlet 22 mm connection, discharge
piping connection 15 mm
b
Adaptor 22 mm×3/4" Female BSP
c
T-piece 22 mm×22 mm×22 mm
d
Tundish 15 mm inlet, 22 mm outlet
e
Wall mounting set for expansion vessel
f
Instruction sheet
g
Expansion vessel of 18 l – 3/4" Male BSP
NOTICE
All piping MUST be installed according to section G3 of the
Building Regulations.