9
User's manual
EN
This option is only available in the Master Wired Thermostat. Select the control algorithm that best fits the
installation. The available options are:
Airflow Control
Silence.
The fan speed is lower than in standard mode to reduce the noise.
Standard.
Set by default.
The system automatically regulates the fan speed based on the number of
zones calling for cooling or heating.
Power.
The fan speed is higher than in standard mode to increase the flow.
Zone navigation
Access to the zone
Access to all the
zones
Zone room
temperature
Zone set-point
temperature
Switch all the
zones on or off
Return to the
main screen
Switch the zone on
or off
Zone
navigation
Vacation.
This mode aims to long periods of absence. It turns off all the zones to save energy and turns
them on avoiding the temperature to surpass the established limit temperature (95 ºF (35 ºC) in cooling
mode and 50 ºF (10 ºC) in heating mode), generating demand with the previous set-point temperature
before activating the vacation mode.
When interacting with the zone while this mode is selected, the controller displays the vacation override
warning. If the set-point temperature is changed, it is maintained for the preestablished period of time (60
minutes by default) and turns off the zones again.
Stop.
The air-conditioning system will remain switched off regardless of the demand status of any zone,
all the motorized dampers will remain opened.
Unoccupied.
This mode aims to short periods of absence. Avoids the temperature to surpass the
established limit temperature for cooling and heating mode, generating demand with a set-point
temperature previously established by the installer (81 ºF (27 ºC) in cooling mode and 63 ºF (17.5 ºC) in
heating mode by default) for returning to the allowed values, as long as the zone is on.
When interacting with the zone while this mode is selected, the controller displays the unoccupied
override warning. If the set-point temperature is changed, it is maintained for the pre-established period of
time.
