14
User's manual
EN
On/Off. Pressing the icon turns the zone in which the thermostat is located on or off. This button also
indicates the system's operation mode. It has a range of colors:
Purple
: the system is shut down; the operation mode is Stop.
Red
: the operation mode is Heating.
Blue
: the operation mode is Cooling.
Green
: comfort; the set-point temperature has been reached.
If the button shows a steady light, the controller is switched on.
If the button is blinking, the controller is off.
The button remains steady for 10 seconds to show its status, and then it turns off.
Set-point temperature.
Using the buttons you can raise or lower the set-point temperature by up to
6 ºF (3 °C) (in steps of 1 ºF (0.5 °C)) with regard to the base set-point temperature defined in Lite settings
parameter of Airzone Cloud.
The LED lights indicate the set-point temperature.
In the event that the temperature limit is exceeded, the temperature adjustment icons will flash, indicating
that you have reached the limit.
CHANGE OF BATTERY
Important:
The use of batteries from leading brands is recommended, similar to those provided. A battery
of lesser quality may have a reduced life.
Remember to place the old battery in an appropriate recycling bin.
Note:
Remember to remove the anti-vandalism system (if installed) before removing the thermostat from
the wall.
When the low battery icon
appears on the display, the battery must be replaced.
Note:
In the case of wireless Lite thermostats, a "Lite low battery" warning message will appear on
Blueface thermostats.
To replace the battery, separate the thermostat from its base and replace the battery (CR2450).
Basic functions
