Daikin AHT MONTREAL XL 175 (U) NAM, Operating Instructions Manual

Page: 45 / 104

AHT Cooling Systems GmbH | en-US Operation (use) | 10
440195_1_0521 45 / 104
§
It is forbidden to store glass containers in
freezers.
§
For refrigerators, check for breakage of
stored glass containers.
Disposal of broken glass.
Cutting injuries to the hands and body.
§
Wear protective gloves to remove splin-
tered glass parts and goods that may
have been damaged as a result.
§
Carefully and completely remove all splin-
tered glass parts and damaged goods.
Leakage of defrosting water.
Slipping hazard.
§
Check for puddles in front of and under
the appliance.
§ Remove any defrosting water that es-
capes immediately.
§ Contact the maintenance service immedi-
ately
[see
}
Chapter 11.3.2] .
NOTICE
Material damage due to misuse.
§
Operate the appliance in a stable operating posi-
tion (horizontal alignment).
§
Operate the unit only on the mounted sliding feet
and swivel castors.
§
Check that the appliance is in good, proper condi-
tion. Any damage must be repaired immediately.
Property damage due to incorrect use.
§ Do not operate the appliance above the climate
class stated on the rating plate
[see
}
Chap-
ter 3.2.1] .
§
The ambient temperature must not fall below 16°C
(60.8°F).
§
Operate the unit only with lids.
§
Check for closed lids.
§
Observe the prescribed storage temperature of the
stored products.
§ Check the interior temperature [see } Chapter 5.1] .
§
In the event of a power failure, stored goods must
be checked by the operating company (tempera-
ture check).
§
Check that there are no foreign objects in the
goods cabinet. Remove incorrectly stored goods
immediately.
§
Remove food and packaging residues
[see
}
Chapter 11.2.1] .
In the case of special climate conditions with high at-
mospheric humidity, condensate formation (condensa-
tion water) can occur in the interior of the device or at
the air outlet openings above. Remove this condensa-
tion for hygienic reasons.
WARNING
Electrostatic discharge and spark for-
mation with flammable refrigerant.
Sparks can ignite the leaking refrigerant when
the refrigerant circuit is damaged/not sealed.
Risk of fire.
§
To remove condensation, use a damp
cloth or sponge.
§
Do not use dry cloths or sponges to dry
the appliance.
10.1 Loading
CAUTION
Material breakage.
Falling hazard. Impact hazard due to falling
parts/goods. Cuts.
§
When loading, do not climb onto or into
the appliance.
Opening/closing the lids.
Hands (body parts) may be trapped.
§
When opening/closing, do not reach into
the opening gap.
§ Look out for other persons when opening/
closing.
Falling objects.
Impact injury. Cuts in the event of glass
breakage.
§
Do not place any objects on the appli-
ance.
Low temperature.
Frostbite to skin.
§
Wear protective gloves when loading.
NOTICE
Property damage due to incorrect use.
§ Only add goods to the appliance once the speci-
fied temperature for the product has been
reached.
§ Do not load the unit when the display shows
"dEF".
§
Carefully add goods.
§
Adhere to loading specifications.
§ Only open the lid briefly for loading and removing
goods.
§
Close lid immediately and completely after loading.
The goods are accessed by opening a lid from above.
Temperature display [see
}
Chapter 5.1]
Loading specification
– Load limit is marked by load limit lines in the unit.