Outdoor Unit
Si121557E
12
Removal Procedure
1.3
Electrical Box
Warning
Be sure to wait for 10 minutes or more after turning off all power supplies before
disassembling work.
Step
Procedure
Points
1
Disconnect the
connector [S70].
[S70]: fan motor
2
Release the fan motor
lead wire from the 5
hooks.
★
: When reassembling, do not
use these 2 hooks.
3
Disconnect the
connectors for the
electronic expansion
valve coils [S20], [S21],
[S22].
Pull out the clamp.
[S20] (white): room A
[S21] (red) : room B
[S22] (blue) : room C
When reassembling, insert
the clamps into the small
holes as below.
[S70]
(R13662)
(R13663)
Fan motor
lead wire
+
[S20] [S21]
[S22]
(R15741)
Clamp
(R13762)
Electronic expansion
valve coils
Gas pipe thermistors
Thermistor
ASSY
Overload protector
and high pressure
switch
