Daikin 3 H HT F, Installation Manual

Page: 12 / 40

6 Electrical installation
Installation manual
12
ETVH/9W
Daikin Altherma 3 H HT F
4P644728-1 – 2021.02
Item Description
Remote outdoor
sensor See:
▪ Installation manual of the remote
outdoor sensor
▪ Addendum book for optional
equipment
Wires: 2×0.75 mm²
[9.B.1]=1 ( External sensor =
Outdoor )
[9.B.2]
Ext. amb. sensor offset
[9.B.3] Averaging time
Remote indoor sensor See:
▪ Installation manual of the remote
indoor sensor
▪ Addendum book for optional
equipment
Wires: 2×0.75 mm²
[9.B.1]=2 ( External sensor = Room )
[1.7] Room sensor offset
Human Comfort
Interface See:
▪ Installation and operation manual of
the Human Comfort Interface
▪ Addendum book for optional
equipment
Wires: 2×(0.75~1.25 mm²)
Maximum length: 500 m
[2.9] Control
[1.6] Room sensor offset
WLAN module See:
▪ Installation manual of the WLAN
module
▪ Addendum book for optional
equipment
▪ Installer reference guide
Use the cable delivered with the
WLAN module.
[D] Wireless gateway
WLAN cartridge See:
▪ Installation manual of the WLAN
cartridge
▪ Installer reference guide
[D] Wireless gateway
for room thermostat (wired or wireless):
In case of… See…
Wireless room thermostat ▪ Installation manual of the wireless
room thermostat
▪ Addendum book for optional
equipment
Wired room thermostat
without multi-zoning base
unit ▪ Installation manual of the wired room
thermostat
▪ Addendum book for optional
equipment
In case of… See…
Wired room thermostat
with multi-zoning base unit ▪ Installation manual of the wired room
thermostat (digital or analogue) +
multi-zoning base unit
▪ Addendum book for optional
equipment
▪ In this case:
▪ You need to connect the wired
room thermostat (digital or
analogue) to the multi-zoning base
unit
▪ You need to connect the multi-
zoning base unit to the outdoor unit
▪ For cooling/heating operation, you
also need to implement a relay
(field supply, see addendum book
for optional equipment)
6.3.1 To connect the main power supply
1 Open the following (see "4.2.1 To open the indoor unit" [
4
5]):
1 Top panel
1
2
3
2 User interface panel
3 Upper switch box cover
2 Connect the main power supply.
In case of normal kWh rate power supply
Interconnection
cable (= main
power supply) Wires: (3+GND)×1.5 mm²
—
A
1 2 3
a