Si121656E
Outdoor Fan / Fan Motor
Removal Procedure
3
2. Outdoor Fan / Fan Motor
Warning
Be sure to wait for 10 minutes or more after turning off all power supplies before
disassembling work.
Step
Procedure
Points
1
2
Disconnect the
connector [S71] and
pull out the clamp.
Release the fan motor
lead wire from the
groove.
[S71]: fan motor
When reassembling, fix the
shield plate to the electrical
box using the clamp.
3
Remove the nut, and
then the outdoor fan.
When reassembling, put the
fan motor lead wire through
the back of the fan motor to
avoid any entanglement with
the outdoor fan.
Nut size: M6
When reassembling, align
the
mark of the outdoor
fan with the D-cut section of
the motor shaft.
Groove
[S71]
Fan motor lead wire
Clamp
(R23602)
Clamp
(R23603)
Nut
D-cut
Outdoor fan
(R23604)
Lead wire
Outdoor fan
(R3249)
10 mm
(0.39 inch)
(R18954)