S
ETTING
I
NTERNAL
F
UNCTIONS
W
ELDING
C
ONDITION
C
HAPTER
6
6-24
6.7 Setting Internal Functions
This section explains how to set the internal functions with the details.
The internal functions can be customized according to the using environment of the customer for further
convenient use of the welding power source.
6.7.1
Setting procedure
This section explains how to set the internal functions.
Details of internal function (
Detailed information on internal functions)
T I P S
• The internal function is activated at the point when the setting value is changed. To change
the set values of internal functions, ensure that there is no mistake in the function No. as
well as in the function setting.
1.
Depress the F (Function) key for one second or more.
2.
Turn the parameter adjustment knob, to display the function No. to set.
3.
Press the F (Function) key again.
⇒
The display on the right digital meter changes to a flashing mode.
⇒
The function No. is displayed on the left digital
meter in a flashing mode.
⇒
The setting value of each function No. is displayed
on the right digital meter.
A
V
r
㧑
F
WARNING
IPM.
sec.
JOB No.
Hz
A
V
r
㧑
WARNING
IPM.
sec.
JOB No.
Hz
