T
RANSPORTATION
P
ROCEDURE
T
RANSPORTATION
AND
I
NSTALLATION
C
HAPTER
3
3-6
3.3.2
Manual transportation with carts
This section explains the manual procedure for transportation using equipment such as a cart.
1.
For welding power source with wheels, use the wheel and push it carefully to prevent it from falling.
2.
When using a tool such as carriers, secure the welding power source and carrier with a rope before
transporting.
• When lifting the welding power source, make sure to hold the bottom of the welding
power source by more than one person.
If attempting to lift by holding the front plastic part, top cover, side plates, it may cause
back pain, deformation or damage to the welding power source.
• When using a tool such as carriers, it must be suitable for the weight of the welding
power source.
Otherwise, falling of the welding power source may occur.
Push direction
