2-9
Chapter 2
Product Specification
and Configuration
P
RODUCT
C
ONFIGURATION
P
RODUCT
S
PECIFICATION
AND
C
ONFIGURATION
C
HAPTER
2
•
Shielding gas
Use a shielding gas suitable to the welding method.
•
Gas regulator
For the gas regulator, make sure to use a device for compressed gas cylinder that conforms to the specific
application of the shielding gas.
•
Cooling water circulation device
In using the water-cooled welding torch, prepare a cooling water circulation device.
•
Welding torch (for TIG welding)
For TIG welding, prepare a torch for TIG welding as well as a gas hose.
•
Welding electrode holder (for DC STICK welding)
For DC STICK welding, prepare a welding electrode holder and a welding electrode.
2.2.4
Optional accessories
This section explains the optional accessories used with the welding power source.
2.2.4.1
Remote control, voltage detection cable and other optional items
Following items are optionally available including remote control and voltage detection cable.
Name
Remarks
CO
2
-
gas
Carbon dioxide (CO
2
) 100 %
MAG gas
Argon (Ar) 80 % + Carbon dioxide (CO
2
) 20 %
Argon (Ar) 90 % + Carbon dioxide (CO
2
) 10 %
MIG gas
Argon(Ar)97.5 % + Carbon oxygen (CO
2
) 2.5 %
MIG gas (stainless)
Argon(Ar) 98 % + Oxygen (O
2
) 2 %
MIG gas (aluminum)/
aluminum-bronze/
/Silicon-bronze)
Argon (Ar) 100 %
Product name
Part No. (Model)
Remarks
Analog remote control
K5416Z00
Includes 3 m cable
Digital remote control
E-2454
CAN communication cable and BKCAN conversion connector are
separately required.
CAN communication cable
BKCAN-0405
5 m
BKCAN-0410
10 m
BKCAN conversion connector
K5810B00
Welding interface unit
IFR-101WB
For robots by other manufacturer
CAN communication module
K5422C00
For using both the digital remote control and servo feeder for CAN.
PC welding monitor
-
Digital interface
E-2503
(*1)
Data storage
E-2560
Gas saver GFC
L10888
Voltage detection cable
K5416N00
Base metal side, 10 m
Voltage detection cable
K5416G00
Base metal side, 30 m
Voltage detection cable
K5416P00
Torch side, 3 m
*1: Update of software version is required. For details, contact your dealer.
