Daihen OTC ARXIS pulse P403L, Owner'S Manual, Page: 134 / 188

132
Chapter 7 Administrator Functions
This chapter explains the functions used by administrators such as protection and initialization of welding JOB.
7.1 Administer settings of welding condition
This section explains how to set welding conditions registered in the memory as favorite or activate.
1.
Menu > JOB memory > JOB setting > Administer settings
2.
Enter the password.
• If the entered password is not valid, "Password NG" appears in the touch panel for 2 seconds and the screen returns to the
previous one.
3.
Select the administer No. to set.
4.
Scroll through the list and select the welding condition to set.