Local Configurations
112
Figure 5-79
Configure the settings for the manual adding device parameters. See Table 5-30.
Step 2
Parameter
Description
Channel
In the
Channel
list, select the channel that you want use on the
Device to connect the remote device.
Manufacturer
In the
Manufacturer
list, select the manufacturer of the remote
device.
IP Address
In the
IP Address
box, enter the IP address of remote device.
The default is 192.168.0.0 which the system cannot connect to.
RTSP Port
The default value setting is 554. You can enter the value according to
your actual situation.
HTTP Port
The default value setting is 80. You can enter the value according to
your actual situation.
If you enter other value, for example, 70, and then you should enter
70 after the IP address when logging in the Device by browser.
User Name
Enter the user name of the remote device.
Password
Enter the password of the user for the remote device.
Remote Channel
Enter the remote channel number of the remote device that you want
to add.
Decoder Buffer
In the
Decoder Buffer
list, select
Default
,
Realtime
, or
Fluent
.
Protocol Type
If the remote device is added through private protocol, the default
type is
TCP
.
If the remote device is added through Onvif protocol, the system
Summary of Contents for XVR Cooper Series
