Operation Manual
Parameter
Description
●
Streaming protocol port, and the default is 554. If you play
the live view with QuickTime, VLC, or a Blackberry
smartphone, the following URL format is available.
●
When the URL format requires RTSP, you must specify the
channel number and bit rate in the URL, and also the
username and password if required.
URL format example:
rtsp://username: password@ip :port/cam/realmonitor?channel=1&
subtype=0
Between that:
●
Username: The username, which would be admin.
●
Password: The password, which would be admin.
●
IP: The IP of the device, which would be 192.168.1.112.
●
Port: Leave if the value is the default 554 value.
●
Channel: The channel number, starting at 1. For example, if
you are using channel 2, then channel = 2.
●
Subtype: The type of bit transmission; 0 means main
transmission (subtype = 0) and 1 means secondary
transmission (subtype = 1).
RTSP port
Example: If you need the secondary stream of channel 2 from a
certain device, the URL should be:
rtsp://admin: [email protected] :554/cam/realmonitor?
channel=21&=1
If the username and password are not required, the URL can
be:
rtsp://ip:port/cam/realmonitor?channel=11&=0
Real-time messaging protocol. The port that RTMP provides
service. It is 1935 by default.
RTMP port
HTTPS port
HTTPS communication port. It is 443 by default.
Step 3: click on
Apply
(apply).
The configuration of
Connections Max.
(Max Connection) is effective immediately, and the
others will take effect after the reboot.
5.1.3 Email
Configure the email parameter and enable email binding. The system sends an email to the
defined address when the corresponding alarm is triggered.
Step 1: select
>
Net
(netwok) >
(E-mail).
17
