Interface Operation 38
No.
Name
Description
4
Status Bar
: Wired network connection icon, meaning that the device
isn’t connected with network.
: Wired network connection icon, meaning that the device
has connected with network in a wired way.
: Wi-Fi network connection icon, meaning that the device
has connected with network in a wireless way.
: Main VTO connection icon, meaning that the device failed
to connect main VTO; without this icon, the device has
connected with main VTO successfully.
: SD card icon, meaning that SD card has been inserted into
the device; without this icon, the SD card has not been inserted
or the device doesn’t support SD card.
: DND (Do Not Disturb) icon, meaning that the device has
enabled DND function. It is not enabled by default.
5
Time
Display date, day of the week and time.
6
Arm/disarm
Display the last unread alarm info.
: press this icon to enter arm mode selection.
7
Setting
Press [Setting], input login password and enter system setting
interface.
Press [Setting] for over 6 seconds, input the password set
during initialization, and enter project setting interface.
8
SOS
Press this icon to call Management Center.
9
Monitor
Monitor the VTO, fence station, IPC, NVT, HCVR and XVR.
Table 6-2
Setting
6.2
6.2.1 Ring Settings
Set VTO ring, VTH ring, alarm ring and other rings.
There is an SD card on the VTH, and users can import ring tones to the SD card.
Ring tones must be stored at the path/mnt/sd/Ring/.
Audio file extension name must be .mp3; audio files must be MP3 files (audio files of other
formats cannot be played if you modify their extension names).
Audio file size must be less than 100kB.
Ring tone format: 16K, 16BIT, mp3.
