Dahua Villa VTO, User Manual, Page: 16 / 32

12
Configure parameters. Step 2
Table 4-5 Security parameter description
Parameter Description
CGI Enable Select the check box to enable, and then you can use CGI command.
Mobile Push
Notification
After you have enabled this, nitifications will be pushed to the app
installed on your phone.
Password Reset
Select the check box to enable, and then the password resetting is
available.
Audio/Video
Transmission
Encryption
If you have enabled this, transmission of audio and video will be
encrypted.
Onvif Enable
After Onvif is enabled, videos from devices manufactured by other
companies can be displayed on the door station web interface.
RTSP Over TLS
RTSP is the abbreviation of real time streaming protocol, it's a network
control protocol designed for use in entertainment and
communications systems to control streaming media servers. The
protocol is used for establishing and controlling media sessions
between end points.
Outbound Service
Information
After it is enabled, service password information cannot be sent to
others.
Multicast/Broadcast
Search
If you have disabled this, VDP configure tools cannot find this device.
Authentification
Mode
There are two modes: Security Mode (Recommended) and compatible
mode.
Click Save to save. Step 3
Onvif User 4.6
Onvif user is only for engineers. You can add, delete, and modify ONVIF user information. The
Onvif username is admin by default.
Onvif user Figure 4-8