5
3.2 Modifying IP Address
Set the IP address for the network segment to allow the Camera to access the network.
Step 1
Log in to the Camera web interface.
Step 2
Select
Setup
>
Network
>
TCP/IP
.
Figure 3-2 TCP/IP
Step 3
Configure IP related parameters.
Step 4
Click
Save
.
3.3 Live Video
The web interface might differ depending on the device. Figures in this guide are for reference only.
Step 1
Log in to the web interface of the Camera.
The default username is admin, and the password is the one that was set during
initialization.
Step 2
Click
Login,
and then the system will display the home page.
