98
In
Preset
box, select a preset (the blue font,
, for example, means the
Step 2
preset has already enabled Call Detection).
The whole surveillance image is set as the call detection area by default (as indicated by the
Step 3
yellow box). If you want to form a specific area, a pentagon, for example, click
Clear
to clear
the yellow box. Then click
Draw Rule
and draw a polygon to form the area you want to
monitor.
If you want to define a specific period (4:00–23:59, for example) for the call detection to
Step 4
work (this means perhaps you don’t need to pay attention to the scene at 00:00–4:00), click
Setting
next to
Period
to define every day in a week.
If you want to set the lasting time of calling behavior beyond which the linked action such
Step 5
as
Relay-out
,
Send Email
and
Record
will be triggered, fill in a value from
1
to
600
in the
Duration
box (the default value is
5
). For example, if you are at a gas station and pay much
attention to calling behavior, set
Duration
to
2
or a less value.
If you want to set the sensitivity, drag the sliding block next to
Sensitivity
. The larger the
Step 6
value is, the more sensitive the call detection will be.
Select
Enable
to enable the preset’s call detection.
Step 7
For linked action settings, see "4.4.10 Configure Linked Measures."
Step 8
Click
Save
.
Step 9
4.4.3.3
View Web Interface Alarm Records
After finishing settings in "4.4.3.1 Configure Smart Plan" and "4.4.3.2 Configure Call Detection", select
Alarm
tab and select
IVS
in
Alarm
Type
to enable alarm notifications on the web interface.
Then view calling behavior records on the
Alarm
tab when an alarm is triggered.
4.4.4
Smoking Detection
4.4.4.1
Configure Smart Plan
Select a preset for which you can enable the Smoking Detection first. Then you can configure
detailed settings.
Go to the
Live
interface and select
Preset
in
PTZ function
box. Then select a preset number and
click
to examine whether or not it’s the scene where you want to monitor
calling behavior. See Figure 4-49. If not, go to
Setting > PTZ > Function > Preset
to add a new
preset.
PTZ function
Figure 4-50
Go to
Setting > Smart Thermal > Smart Plan
.
The
Smart Plan
interface is displayed.
Step 10
