26
6.2
Pole-mounted Bracket Installation Steps
6.2.1 Installation Conditions
Pole-mounted speed dome can be installed on hard pole-shaped structure in both indoor and
outdoor environments. The wall needs to meet the following installation conditions:
The diameter of the pole structure shall comply with the installation dimension of the clamp.
Default factory hoop is 5 inches for the pole of
φ
80-130mm. It can work with the pole-
mounted bracket. You can adjust the diameter and the value (hoop specification) is :
φ
59-
82mm,
φ
84-108mm,
φ
80-130mm,
φ
130-152mm,
φ
155-178mm,
φ
180-203mm and
φ
194-
216mm. It is optional according to customers
’ requirements; special dimension can be
customized as well.
The pole-mounted structure needs to sustain at least 8X weight of the camera and bracket
etc.
6.2.2 Installation Steps
Step 1
As it is shown in Figure 6-3, it is to install hoop and pole-mounted bracket. Pull the cable out of
the pole accessories and then use hoop to fix the accessories to the pole firmly. Finally, you can
use silicon sealant to cover the cable outlet and make it waterproof.
Figure 6-3
Summary of Contents for SD6AE series
Page 1: ...6 inch IR Intelligent Speed Dome Installation Manual Version 1 0 0 ...
Page 23: ...14 Figure 2 17 ...
Page 30: ...21 Figure 4 5 ...
Page 33: ...24 Figure 5 4 ...
