2
2 Quick Configuration
You can view the system information, and configure the switch parameters including ONVIF, IP
address and more. The pages on the manual are for reference only, and might differ from the actual
pages.
2.1 General
Select
Quick Config
>
General
, you can view the device name, IP address, subnet mask and default
gateway of the switch.
Figure 2-1 General information
2.2 Port Information
Select
Quick Config
>
Port Info
, you can view information including port, type, link status,
speed/duplexing, VLAN, RX usage, TX usage and media type of the switch.