16
●
Only the ports with the same speed rate, duplex, long distance and VLAN configuration can be in
the one aggregation group.
Step 1
Select
Network Settings
>
Link Aggregation
.
Step 2
Click
Add
.
Step 3
Select the
Aggregation Group No.
.
Step 4
Select the
Aggregation Group Mode
from
Static
,
LACP Active
,
LACP Passive
, and
Close
.
Step 5
Set the
Operational Key
.
●
You can only configure link aggregation when the
Aggregation Group Mode
is set as
LACP.
●
The value ranges from 1 to 65535.
Step 6
Select the
Timeout
from
Long Timeout
or
Short Timeout
.
Step 7
Click
OK
.
Figure 4-6 Add link aggregation
Figure 4-7 Link aggregation
4.6 Configuring SNMP Protocol
SNMP (Simple Network Management Protocol) is the standard protocol for network management in