User's Manual
371
4.12.11 Setting iSCSI
Background Information
Internet Small Computer Systems Interface (iSCSI) is a transport layer protocol that works on top of
the Transport Control Protocol (TCP), and enables block-level SCSI data transport between the iSCSI
initiator and the storage target over TCP/IP networks. After the network disk is mapped to the NVR
device through iSCSI, the data can be stored on the network disk.
This function is only supported by select models. The actual product shall prevail.
Procedure
Step 1
Select
Main Menu
>
STORAGE
>
iSCSI
.
Figure 4-258
Step 2
Set parameters.
Table 4-83
Parameter
Description
Server Address
Enter the server address of iSCSI server.
Port
Enter the port of iSCSI server, and the default value is 3260.
Storage Path
Click
Storage Path
to select a remote storage path.
Each path represents an iSCSI shared disk and these paths are generated
when created on the server
Summary of Contents for NVR52-16P-4KS2 Series
