User's Manual
275
Figure 4-166
Step 3
Enter human face database name and then click
OK
.
System successfully saves the face library.
4.7.3.1.1 Adding Face Pictures
You can add face pictures to the existing libraries one by one or by batch, or add from the detected
faces.
●
To add face pictures one by one or by batch, you need to get the pictures from the USB storage
device. The picture size should be smaller than 256K with resolution between 200×200–
6000×5000.
●
The picture resolution for NVR2-I series should be less than or equal to 1920×1080.
4.7.3.1.2 Adding One Face Picture
Background Information
You can add one face picture to the database. It is for the scenario that the registered human face
picture amount is small.
Procedure
Step 1
Select
Main Menu
>
AI
>
Database
>
Face Database Config
The
Face Database Config
interface is displayed.
Step 2
Click of the library that you want to configure.
The
Details
interface is displayed. See Figure 4-167.
Summary of Contents for NVR41-4KS2 Series
