44
Figure 2-42
2) Check the Enable box to open snapshot function and input FTP server IP, port,
username, password and etc.
Note
If you do not check the Enable box here, system does not connect to the FTP server.
At the same time, if you have inserted a flash disk, all the snapshot pictures will be saved
on the flash disk.
If the FTP service and flash disk are both available at the same time, the FTP has the
higher priority. That is to say, all snapshot pictures will be saved on the FTP server.
The snapshot function is null if the FTP service and the flash disk are not available.
3) Click Test button, system begins FTP test. You can see connection is OK once you
see the corresponding interface.
4) Click OK button, you can complete snapshot function.
2.3.9.7 Backup
In this interface, you can set pre-record time of the monitor video. See Figure 2-43. Please
follow the steps listed below.
1) Click Backup button on the Advanced interface. You can see an interface.
2) Input pre-record value (such as 0 s to 5s) and click OK button to complete setup.
Summary of Contents for NKB
Page 1: ...Network Keyboard Quick Start Guide V1 2 0 ...
Page 55: ...54 Figure 2 54 Figure 2 55 ...
Page 64: ...63 ...
