Dahua Navigator X820, User Manual, Page: 30 / 115

17
Figure 2-13
No. Name Function
11
PTZ course
pulley
Control horizontal shooting angle of camera lens.
12 Snapshot Press this button shortly to snapshot present image.
13 Flight mode lever
3-level lever to select flight mode.
Upper level: intelligent flight mode. The aircraft flights 
automatically according to the specified course.
Middle level: flight at the specified height. When the throttle 
lever is at the central mode, the aircraft flights at the same
height automatically.
Lower level: flight at the specified position. When all levers 
are at the central mode, the aircraft hovers at the same
position.
14 4G SIM slot Reserved.
15 Audio output port Connect to earphone, sound box and etc. It is to play audio.
16
Reset button of
remote control
Reserved.
17 Micro USB port
Insert data cable to connect PC. It is to transmit the data to the
PC.
18 SD slot
Insert SD card: The SD card with the chip is facing down.

Insert the card to the slot horizontally.
Remove SD card: Press SD card inwards, so SD card pops

up a little bit, and can be pulled out.
19 Power port Input DC 12V power.