Dahua NAVIGATOR X650, User Manual

Page: 96 / 101

83
Aircraft State Indicator Appendix 2
The aircraft status indicator over the power switch is turned on after the aircraft is enabled.
Different colors and statuses mean differently. Please refer to the Appendix Table 2-1.
Please do understand the contents listed in the table below before flight, which is to help you
quickly understand the aircraft status or positioning problem during flight. The actual operation
methods will be specifically introduced in other chapters.
Phase Indicator color and status Implication Operation
Start
● ● ● ● ● ● ● ● ●
…
Self-check and preheating Wait
●
Normally on
System self-check report
error
-
● ● ● …
Aircraft in no-fly zone
Move the aircraft out
of no-fly zone.
Please refer to “1.13
Check
and
Debugging
” for the
flight area.
Compa
ss
calibrati
on
●
Normally on
Horizontal calibration of
compass
Wait
●
Normally on
Vertical calibration of
compass
Wait
● ● ● ● ● ●
…
Calibration failure of
compass
Manually calibrate
compass
Pair
●
Normally on Pairing success -
Flight
● ● ●
…
Take off normally -
● ●● ● ●● ● ●●
…
-
Disconnected from
remote control for
more than 3s
-
● ●● ● ●● ● ●●
…
Level 1 low battery
warning
-
● ●●● ● ●●● ● ●●●
…
Level 2 low battery
warning
-
●● ●● ●● ●● ●● ●●
…
-
Disconnected from
remote control for
more than 3s
-
●● ●● ●● ●● ●● ●●
…
Level 1 low battery
warning
-
●● ●●● ●● ●●●
●● ●●● …
Level 2 low battery
warning
-
● ●● ● ●● ● ●●
…
Disconnected from -