26
Flight Preparation
This chapter elaborates complete flow before the aircraft is unlocked and takes off.
Please select operation according to the actual situation after the first flight is over, if it is
not the used for the first time.
Please operate by strictly conforming to the steps described in this chapter; the operation
sequence can't be reversed.
Flight
Preparation
Phase
Unpack
↓
Check remaining power →Please charge in case of low battery
↓
↙
Prepare airborne device
↓
Prepare aircraft
↓
Prepare remote control
↓
Enable aircraft power
↓
Check debugging →All debugging is normal
↓
↙
Start flight
Figure 0-1
4.1
Unpack
Take out aircraft, battery and remote control from the packing box.
4.2
Check Remaining Power
Check the remaining power of aircraft battery and remote control. Implement the subsequent
steps after confirming that the battery reaches the standard.
