3 Installation and Configuration
3.1 Camera Configuration and Cables
The following figure depicts the type and location of camera controls and cables coming from the
device. This image is intended as a reference only.
Figure 3-1
Camera Components
Ref
Description
1
Dome Enclosure
2
Camera Module
Cable Connections
Function
Description
Power
Power port. Input 12 VDC
Use power according to the device tag.
LAN
Connect to standard Ethernet cable.
Note:
Certain devices support Power over Ethernet. Check the specific
device to determine if the device accepts PoE and use an appropriate
Ethernet cable and network to supply power.
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]
