Local Configurations
61
Show Message
Figure 4-43
Result Verification
Take the configuration of motion detection on alarm linking with screen output as an example.
When an alarm is triggered, the
Alarm Status
interface is displayed on the local interface of
the Device.
4.5.1.7 Linking Email Sending
After Email sending is linked, the system sends an alarm email to a designated recipient
when an alarm is triggered.
4.5.1.7.1 Configuring Email Settings
The alarm linking with mail sending is effective only when the email address, recipient and
other information are configured.
Select
NETWORK > EMAIL
.
Step 1
The
interface is displayed. See Figure 4-44.
