Dimension and Installation
3
2
Dimension and Installation
This introduces how to install the hardware of the Device. Before installing the hardware, you
need to know the device information, such as front and rear panels, physical dimensions, and
interface definition. After obtaining a sufficient understanding, you can install the SIM card, SD
card, antenna, and the device itself as needed.
Out-of-box Audit
2.1
When you receive the Device, unpack the box for checks.
Firstly, check if there is any damage on the Device appearance (although the packing materials
are specially selected for protecting the Device from most of accidental hit during
transportation). Secondly, open the accessory box to check if the accessories are complete
against the packing list.
Instructions about front panel, rear panel, and labels:
The functions of indicator lights and ports are described in the later chapter of the Manual.
The labels on the Device are very important for our after-sales service. To ensure the
after-sales service,
keep the labels well, and do not tear or throw away.
You need to
provide the serial number of the product when calling the after-sales service.
Device Structure
2.2
2.2.1 Front Panel
Describes the functions of the indicators and interfaces of the front panel.
Front Panel
Figure 2-1
Table 2-1 Descriptions of interfaces and indicators
No.
Name
Descriptions of interfaces and indicators
1
USB interface
For mouse access or USB data backup.
2
Lock switch (Device
switch)
To plug or unplug the SD card, the Device must be
unlocked. In this case, the Device will shut down
automatically if powered on.
To protect SD card, the Device cannot be powered on if
unlocked. Lock the Device before powering on.
