Dahua Mobile DVR Series Page 172 User Manual Download

Page: 172 / 172

161

10 Abbreviation

A~P

DDNS

Dynamic Domain Name System

DHCP

Dynamic Host Configuration Protocol

DSS

Digital Surveillance System

G-SENSOR

Gravity-sensor

Internet Protocol

MTU

Maximum Transmission Unit

NTP

Network Time Protocol

Note



This manual for reference only. Slight difference may be found in the user interface.



All the designs and software here are subject to change without prior written

notice.



All trademarks and registered trademarks are the properties of their respective

owners.



If there is any uncertainty or controversy, please refer to the final explanation of us.



Please visit our website or contact your local service engineer for more

information.

Summary of Contents for Mobile DVR Series













































































































































































Search results

Summary of Contents for Mobile DVR Series

Reviews:

Related manuals for Mobile DVR Series

Brands by name

Popular brands

Dahua Mobile DVR Series, User Manual

Search results

Summary of Contents for Mobile DVR Series

Reviews:

Related manuals for Mobile DVR Series

Brands by name

Popular brands