Dahua MNVR4104-I Series User Manual Download

Page: 91 / 145

Download

Click

Stop all

to stop downloading.

(Optional) Select the file that you want to verify, and click

Watermark

Watermark can be used to verify whether the record file is falsified.

The verifying progress and result are displayed.

Configuring Display Output Settings

You can configure live audio, device tour and video mirror settings.

5.4.1

Configuring Live Audio

On the main web interface, click

DISPLAY > Display

Click

Enable

to enable the live audio. See Figure 5-33.



After enabling, AV, VGA and HDMI are switched to single screen, and the preview
sound is output normally.



If it is not enabled, AV, VGA and HDMI are switched to single screen, and preview
sound will not be output. But it does not affect video playback and intelligent alarm
voice broadcast sound.

Summary of Contents for MNVR4104-I Series


















































































































































Search results

Summary of Contents for MNVR4104-I Series

Reviews:

Related manuals for MNVR4104-I Series

Brands by name

Popular brands

Dahua MNVR4104-I Series, User Manual

Search results

Summary of Contents for MNVR4104-I Series

Reviews:

Related manuals for MNVR4104-I Series

Brands by name

Popular brands