13
PointToPoint
Point to point display.
Different signal modes have different zoom modes.
Step 3
Press
Menu
on the remote control to complete the setting.
4.1.8
Noise Reduction
To improve quality of images, adjust the noise reduction.
Only in CVBS signal mode can you select image noise deduction function.
Step 1
Select
Image
>
Noise Reduction
.
Figure 4-10
Noise reduction
Step 2
Select noise reduction parameters by the up and down buttons on the remote control
according to your requirement.
Step 3
Press
Menu
on the remote control to complete the setting.
4.2
Geometry
Different signal modes have different geometry parameters.
DVI/HDMI/CVBS Signal
You can not set Geometry parameters in DVI, HDMI, and CVBS signal modes.
VGA Signal
On the main menu, press the left and right direction buttons until the
Geometry
interface is
displayed.
