Dahua KTP03, User Manual, Page: 57 / 87

51
Forward
Input VTH no. in the corresponding forward mode, tap to enable the forward
function.
Table 4-7 Parameter description
Parameter Description
Always All incoming calls will be forwarded to preset number immediately.
Busy
When the user is busy, incoming call from the third-party will be forwarded to preset
number. If No Answer is not set, when the user refuses to answer, the incoming call
will be deemed as busy forwarding.
No Answer
If no one answers after VTH ring time, the incoming call will be forwarded to preset
number.
Set VTH ring time at Setting > Ring > Other interface.

To forward to a user of another building or unit, the forward number is Bu Unit
+ VTH room number. For example, input 1#1#101 for 101 of Unit 1, Building 1.

To forward to a user of the same unit, the forward number is VTH room number.
Tap OK to save settings.
4.6.6 General Setting
Set VTH time, display, password and others.
4.6.6.1 Time Setting
Set VTH system time, time zone and DST.