Dahua KTP03, User Manual, Page: 67 / 87

61
Arm and Disarm Function
4.9.1 Arm
In case of triggering alarm after arm, produce linkage alarm and upload alarm info.

Please ensure that the area has been added into arm mode. Otherwise, there will be no alarm
triggering after arm.

Please ensure that it is in disarmed status. Otherwise, arm will fail.
Tap at the main interface.
Arm mode
Select arm mode.
Enter arm and disarm password; tap OK .
The device beeps continuously, which represents successful arm. The key displays
corresponding arm mode.

Default password of arm and disarm is 123456. Please refer to 4.6.6.3 Password Setting
for details.

If delay alarm is set in the area, the device will beep continuously at the end of exit delay
time.